This machine uses LDPE or LLDPE as material to produce casting stretch film. Three Screw Co-Extrusion, each screw allow different formulas to produce single side sticky stretch film, Mainly used for machine wrap type stretch film making. Screw and Barrel use 38CrMoAIA Alloy steel, after nitriding and special treatments. Machine cooling with water circulation, best cooling effect and best transparency of stretch film.
|
Model |
JDCPE80/60/60A-1500 |
|
Screw Dia |
Φ80mmΦ60mmΦ60mm |
|
L/D |
30:1 |
|
Product Width |
500-1500mm |
|
Film Thickness |
0.01-0.03mm |
|
Design Line Speed |
80m/min |
|
Production Capacity |
120kg/h |
|
Main Motor |
30kw/18.5kw/18.5kw |
|
Heating Power |
86kw |
|
Total Power |
164kw |
|
Weight |
9000kg |
|
OveralDemension |
8000mm×4500mm×1900mm |
|
Power Supply |
380/3/4/50（Volt/Ph/Line/Hz） |
Note：
Our machines can be custermized according to different requests，such as: Width 1-2meter, layer 2-7 layers, so clients can always match their market request.
Due to the continuous improvement of the products, the appearance and technical parameter subject to change without notice.
1.Speed design: up to 150 M/min.
2. Working speed: 80~120 M/min.
3. Production capacity: 80~20 KGS/H (depends on the film thickness and line speeds).
4. Quality stretch film which can compare with the film produced by European machines.
Double Extruder Co-Extrusion, product can be single side sticky to save glue cost. Machine real stable working speed 150/Min. PLC Touch Screen Control, easy operation, high efficiency. Machine equipped with high speed edge online recycle system, entire process full automatic, save manufacturing cost and labor cost. Winder PLC control, reduce labor cost, high efficiency.
Double Extruder Co-Extrusion, product can be single side sticky to save glue cost. Machine real stable working speed 150/Min. PLC Touch Screen Control, easy operation, high efficiency. Machine equipped with high speed edge online recycle system, entire process full automatic, save manufacturing cost and labor cost. Winder PLC control, reduce labor cost, high efficiency.
This machine uses LDPE or LLDPE as material to produce casting stretch film. Three Screw Co-Extrusion, each screw allow different formulas to produce single side sticky stretch film, Mainly used for machine wrap type stretch film making. Screw and Barrel use 38CrMoAIA Alloy steel, after nitriding and special treatments. Machine cooling with water circulation, best cooling effect and best transparency of stretch film.
